header Menu
Radium PCV Fluid Lock Catch Can Kit - Nissan 350Z Z33/Skyline V35/Infiniti V35 (VQ35DE)
Radium PCV Fluid Lock Catch Can Kit - Nissan 350Z Z33/Skyline V35/Infiniti V35 (VQ35DE)
SKU: 20-0728-FL

Radium PCV Fluid Lock Catch Can Kit - Nissan 350Z Z33/Skyline V35/Infiniti V35 (VQ35DE)

$415.00

or 4 payments of $103.75 with Info



In Stock


Calculate Shipping


Australia wide rate - $20.00 (ETA: 3 days)


Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. These kits mount using factory holes and integrate perfectly with the surrounding components. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modifications are required.

The PCV catch can kit runs inline between the PCV valve and the intake manifold. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hoses will experience "metered" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. NOTE: No inline check valve is required since Radium catch cans are pressure sealed. This means a direct intake manifold connection is permitted.

The catch can mounts to the OEM power steering reservoir bracket. This kit traps unwanted "metered" crankcase vapor, unspent fuel, and oil sludge. It promotes clean filtered air back into the intake manifold.

INCLUDES

  • Baffled oil catch can
  • Nissan specific mounting bracket
  • AN adapter fittings and hose ends
  • Stainless steel hardware
  • Radium PCV hose

NOTES:

  1. The PCV catch can kit will not work with VQ35HR vehicles. They have a noncompatible P/S reservoir mount.
  2. No extra inline check valve is required since Radium catch cans are pressure sealed.

Vehicle Fitment:

  • 2002-2006 Nissan 350Z Z33 (VQ35DE Only)
  • 2001-2006 Nissan Skyline V35 (VQ35DE Only)
  • 2001-2006 Infiniti G35 V35 VQ35DE Only)

SKU 20-0728-FL
Brand RADIUM
Shipping Weight 3.0000kg

More From This Category


$20.00

or 4 payments of $5.00 with Info

SKU: 18-0085

Radium Intake Manifold Gasket - Toyota Supra A90 19+

$150.00

or 4 payments of $37.50 with Info

SKU: pf-PFEFRKRB25CH

Proflow Fuel Rails Kit Billet Aluminium Chrome For Nissan RB25

$1,948.63

or 4 payments of $487.16 with Info

SKU: aeromotive-18023

AEROMOTIVE A1000 Brushless Stealth Fuel Pump(18023)

$30.99

or 4 payments of $7.75 with Info

SKU: sakura-FC-5715

Sakura FC-5715 Fuel filter - FC-5715

$239.00

or 4 payments of $59.75 with Info

SKU: 1050.48.11.WRX

ID1050-XDS Injector Dynamics XDS Fuel Injectors- Universal Fitment- ID1050

$289.00

or 4 payments of $72.25 with Info

SKU: WB-F90000295

Walbro 535LPH HIGH PRESSURE Fuel Pump E85 Safe Genuine with Fitting kit

$290.35

or 4 payments of $72.59 with Info

SKU: Aeromotive-12304

AEROMOTIVE 100 Micron, ORB-10 Red Fuel Filter(12304)

$205.28

or 4 payments of $51.32 with Info

SKU: pf-PFEFRKLS1BK

Proflow Fuel Rails Kit For Holden Commodore VT-VZ LS1 -08AN ORB Billet Aluminium Black Anodised

Contact Us